Search for a command to run...
Series
In this series of blog posts we work through creating am IoT based solution using .NET 7 / C# as the programming language. The device that I am using is a Raspberry Pi 4 Revision B.
Continuing from Pizza Delivery IoT Project Pt. 1, I have completed much of the circuit design on my breadboard and completed the basic code necessary to interact with the sensors on the board. To interact with the various components on the board, I ...
Introduction There is an ongoing project each year for the Developer Advocates to build sample applications. This year my sample application is going to be built around an IoT use case. This project was the catalyst for my IoT for the .NET developer ...
Setting up your "Thing" in the AWS Console. This post is the third in my series IoT for the .NET Developer. You can find the companion video for this blog post here: Sending IoT Data to AWS IoT Core using .NET - YouTube. In the last post in this seri...
In my last article "IoT for the .NET Developer", I covered how you can get .NET 7 installed and running on your RaspberryPi. In this article, I am going to cover how to get your Raspberry Pi set up and connected to AWS's IoT Core. There are two main ...
In this blog post, we are going to start the process of developing an Internet of Things (IoT) solution using .NET 7 on a Raspberry Pi. IoT systems often run a lightweight Linux OS and leverage ARM hardware with low-power processors and have small am...
